Thermal Analysis --> TMA / DMA--> TMA PT 10

Down

Description This TMA was specifically developed to measure the CTEs of Polymers and Resins in the temperature range -30 to +70°C. The instrument is built into a very compact nicely designed housing, where all necessary components are included. The sample can be inserted after the protecting cover is opened from the top of the instrument. The sample is loaded between a fixed point and a moveable push rod out of quartz glass, which is connected to a high precision LVDT sensor, with 10nm / 1,25nm/digit resolution. Sample dimensions of maximum 50 mm length and 8, 5 mm diameter are possible. An option is available, so that the hardening processes of Resins can be measured.

TMA - PT10 Temperature Range -30 to +70°C Max. sample size 50 mm (L) , 8,5 mm (D) Measurement precision +/- 0.1% Resolution 0.2nm RMS Noise 3.5nm Dynamic baseline drift <1µm Force range 0.001 to 1 N Force resolution 0.001 N Mass Flow Control Optional Atmosphere Air Operation Modes   Standard Included Optional   DTA feature Optional

Download     TMA_PT_10_ENG.pdf     Size: 251 KB

Top