Go to Start Page Go to Start Page Go to Start Page Go to Start Page
Recommend this site Contact us Print this page
   

   Thermal Analysis

   Dilatometer

   TGA/STA

   MS/FTIR

   DSC/HDSC

   DTA

   TMA/DMA


   Thermal Conductivity
         Laser Flash

   XFA 500 XenonFlash
   LFA 1000 LaserFlash
   THB Transient Hot Bridge
   HFM Heat Flow Meter


   Seebeck Coefficient/
        Electric Resistance


   Software

   Test Lab

        
   Data Loggers

   Recording Instruments

Thermal Conductivity and Thermal Diffusivity Measurement

Thermal Conductivity and Thermal Diffusivity - Laser Flash-LFA-XFA-THB-HFM

Precise measurement of Thermal Conductivity and Diffusivity of solids, liquids, powders and pastes is becoming more and more crucial. The Laser Flash technique has proven to be the fastest and most flexible measurement technique when it comes to determining thermal conductivity and diffusivity. The two offered LFA models cover all possible application areas.

The THB - Transient Hot Bridge, Thermal Conductivity Meter enables thermal conductivity, thermal diffusivity and specific heat measurements in the temperature range -50 ... 200°C. The offered measuring range of 0.02 to 30 W/m*K complements the Laser Flash Analyzer perfectly.

Correspondence with International Standards. The LINSEIS LFA and XFA operate in agreement with national and international standards such as: ASTM E-1461, DIN 30905 and DIN EN 821.

XFA 500 Xenon Flash up to 500°C

XFA 500 Xenon Flash (XFA)

Xenon Flash Thermal Constant Analyzer
Temperature: RT up to 500°C
Pulse source: Xenon Flash
Method: ASTM E 1461
Features:                Sample Robot
Up to 6 Samples
more details on XFA 500 Xenon Flash...
LFA 1000 Laser Flash up to 1600°C

LFA 1000 Laser Flash (LFA)

Laser Flash Thermal Constant Analyzer
Temperature: -125 up to 500°C
RT up to 1250°C
RT up to 1600°C
Pulse source:          Laser Flash
Method: ASTM E 1461
Features: Sample Robot
Up to 6 Samples
more details on LFA 1000 Laser Flash...
THB Transient Hot Bridge

THB Transient Hot Bridge (THB)

Transient Hot Bridge
Temperature: -100°C up to 200°C
Sensor type: Kapton Insulated Sensor
Smallest sample: size13mm diameter or
square x 3mm height
Max. Sample size: unlimited
more details on THB Transient Hot Bridge...
HFM Heat Flow Meter

HFM Heat Flow Meter (HFM)

Heat Flow Meter
Temperature:   -30°C up to 90°C
Thermal resistance
measuring range:
  0.1 to 8.0 m2 K/W
Thermal Conductivity
measuring range:
  0.005 to 0.5 W/m•K
Sample Size:   300x300x100mm3
600x600x200mm3
more details on HFM Heat Flow Meter...